Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Deposition of Nanocomposite NiSiC Coatings

I am currently involved with research activities on electrodeposition of nanocomposite coatings particularly with Ni SiC coating.I am encountering a problem of frothing during coating using a current intensity of 100mA for a time of 3 hrs conc. of Watt's Electrolyte is 50 gpl subjected to magnetic stirring also the thickness of coating is not uniform..

Meenu Srivastava
plating - Bangalore, Karnataka, India
2004

I'm working on a project for my Ph.D and it's about producing NiSiC micro and nanopowder. Since I'm about to start the project, any initial information will help me very much.
Information could be about the required raw material, process selection, etc.
Your help and attention will be highly appreciated.
Best Regards.
Sohrab Farahani.

Sohrab Farahani
Ph.D student - Tehran, Iran
October 8, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: