Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Galvanizing kettle problems

SOME SUGGESTED GALVANIZING BOOKS
for Shops, Specifiers & Engineers

"Hot Dip Galvanizing of Steel Structures" by Kuklik & Kudlacek (2016)
avail from eBay, AbeBooks, or Amazon

"Handbook of Hot Dip Galvanization" by Maass & Peissker (2011)
avail from eBay, AbeBooks, or Amazon

"Galvanized Steel Reinforcement in Concrete" by Stephen Yeomans (2004)
avail from eBay, AbeBooks, or Amazon

"Hot Dip Galvanizing -- A Guide to Process Selection & Galvanizing Practice" by M. J. Hornsby (1995)
avail from eBay, AbeBooks, or Amazon

"Faults in Hot-Dip Galvanizing" by Dietrich Horstmann (in English, French & German)
avail from Amazon

"User's Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service" by NACE (1997 only rarely avail.)
avail from AbeBooks, or Amazon

(as an Amazon Associate & eBay Partner, finishing.com earns from qualifying purchases)

Hello!

It has been a nice forum for solving the daily routine galvanizing problems. In my daily Hot dip galvanizing practice I have seen galvanizing kettles developing cracks and small holes in addition to bending of side walls if side flanges of appropriate thickness are not provided. To me the development of cracks and holes is due to hot shortness and bending is due to the development of stresses which are irresistible by side flanges. Kindly do let me know of your opinion

Syed Salman Ali
Metallurgist - Lahore, Punjab, Pakistan
2004

There is no problem on ceramic kettles.

engin inam
gata galvaniz - turkey,pendikistanbul,
2005

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: