A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing
on this site FORUM
"Finishing Shops for the 90's and Beyond"
Just looking for a copy of the article you used to have on "Finishing Shops for the 90's and Beyond" Thanks! Mike Solvie
- Spokane, Washington
That article was printed in Plating & Surface Finishing, March 1994. Reprints and back issues are presumably available from the publications department at A.E.S.F.; but an on-line version of the article is available right here.
Ted Mooney, P.E.
Pine Beach, New Jersey
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.