finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
topic 3064

GMP Standards


(1999)

Are there any printed "Good Manufacturing Practice" guidlines for the Chromate plating operation, if so how can I get a copy. Also is acceptable to chromate steel and aluminum on the same process line. Finally I have a supplier who does not air agitate his tanks. What might be some of the problems from not doing this. Thanks for your help.

Morris Bellows
- San Diego, California


(1999)

I am not sure what you mean by "Chromate plating" operation, Do you mean chromium plating?

You might be able to chrome plate steel and aluminum on the same process line, if you have enough tanks.

A supplier who does not air agitate his tanks may have no problems related to agitation. What did you observe which made you ask the question?

Sincerely,

tom pullizzi monitor
Tom Pullizzi
Falls Township,
   Pennsylvania 



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.