Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Nickel Anodes: Typical Composition and Levels of Impurities

Q. I would like any information on the Quality of used in the plating industry. This information would be useful if the levels of impurities were included as well as the required percentages. Thanks Steve

Steve Sarten
- Oak Ridge, Tennessee
1999

A. Hi Steve. Looks like there's a typo of omitting a word there. So I'll assume the missing word is anodes, and you're looking for an analysis of nickel anode material? This is presumably available from the suppliers of same, such as Carter Alloys Company [a finishing.com supporting advertiser] INCO, Outokumpu, Tally Metal, etc.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

finishing.com is made possible by ...

this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: