Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Electropolishing of copper aluminium alloys

hi, I am in 4th year chemical engineering and my project is ELECTROPOLISHING OF COPPER ALUMINIUM ALLOYS USING PHOSPHORIC ACID , and I wanna know more about it and how it works!

maha farah
chemical engineer - alex, alexandria, egypt
2004

I am doing my last year in engineering metallurgy and am doing a project on electropolishing of copper. I would like to know more about the project as I'm having insufficient information. It would indeed be a privilege to hear about your input.

Thank you.

Ntobeko
- Johannesburg, South Africa
2004

April , 2008

Hi, folks. There is at least some information about electropolishing of copper in the Electroplating Engineering Handbook [on AbeBooks or eBay or Amazon] . Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: