Mr. Rogers: "Look for the Helpers. You will always find people who are helping."
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

Gold plate non conductive wooden substrates

I want to gold plate wooden substrates. Can some one tell me how to make them conductive?

Thanks,

ANANIADIS KOSTAS
research - PERISTERI, ATHENS, GREECE
2004

2004

Our FAQ on Plating Organic Materials will be a start. The required metallization method could depend on other things, but I think lacquering and then coating with a conductive (copper or silver-bearing) paint would work. Suppliers include Acheson Colloids and G.J. Nikolas [a finishing.com supporting advertiser].

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: