A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing
on this site FORUM
IVD Peel Strength
I am interested in the peel strength of IVD aluminum coatings on aluminum substrates. Any replies would be greatly appreciated.
- Dallas, Texas
The strength should be as good as the tensile strength of the aluminum if done properly.
Donald M. Mattox
Society of Vacuum Coaters
Albuquerque, New Mexico
Mr. Mattox is
the author of -->
June 9 -
Here at our shop we coat a variety of aluminum alloys with IVD Aluminum. For a peel test, we use 3M tape #250 on the IVD Aluminum. This #250 tape has a peel strength of 62 lbs PSI.
plating shop - Compton, California
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.