netneut
finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing


Finishing.com has been free for 22 years,
but without net neutrality we could soon
cease to exist. Do us a solid, click on
the banner, and contact congress today!
HomeFAQsBooksHelpWantedAdvertiseForum
topic 2917

Info on Cobalt-Zinc or Cobalt-Nickel alloy plating


(1999)

Hi.. I am after information on zinc-cobalt and zinc-nickel plating, a 'new' process that my employer has shown an interest in. Since I am new to this firm, I would love to be able to further cement my position in the company by being able to show him plenty of information on the process - plant needs, chemicals, etc. If all goes well, I may get one thing I've wanted since joining this firm - my own plating plant to play with :-)

If the info is to large to publish here, could you please provide me with links to suitable sites, or e-mail me the info. Am also interested in just making contact and chatting with other platers.

Thanks in advance and thanks to finishing.com

David Chord
plating shop - Porirua, New Zealand


(1999)

The Zinc alloys plated with either iron, cobalt, or Nickel are viable alternatives to cadmium plating. New techniques are being devised all the time. The zinc/nickel will give the highest degree of protection to salt fog, while the zinc/cobalt will offer better Kesternich (sulfur dioxide) Test results. Zinc Cobalt may be plated out of either acid or alkaline baths. Zinc Nickel gives best results from an alkaline non cyanide bath, and is offered in two types.
1. Low Nickel= Plates 5 - 9% Nickel in the alloy.
2. High Nickel = plates 10 - 15% Nickel in the alloy.

The European community favors the High Nickel, while the far East and U.S. markets now favor low nickel.

ed budman
eb sig
Ed Budman
- Pennsylvania


(2002)

Hi

I am looking forward to have information on Cobalt - Zinc alloy plating. I would like to know about some information on what exactly the process is? What I am looking for is its application on aluminum base? Can you suggest me any book or research paper? Awaiting for your reply.

Thank You,

Bharat Panchal
- Cleveland, Ohio



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.