A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing
on this site FORUM
CP Ti etch maskant
We are currently etching 4902 (.018-.022" thk) titanium for bonding to composite fan blades. One side is masked with tape and the
"etched" side is spattered with a maskant ( a spray on adhesive, very tough to remove). I am looking for a maskant that will stand up to a fairly mild Hf and Ni bath that can be removed reasonably easy. Can anyone enlighten me on alternative sprayable maskants and methods? Has anyone used Dapco 10220? Thank you.
- Stuart, Florida
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.