No cost, no registration, no passwords -- just aloha, fun & authoritative answers
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Troubleshooting Barrel Plating

Hi,

My Company is setting up for barrel plating copper onto lead projectiles for our state Police Department. I would like to know which book or books that can help with trouble shooting in copper cyanide baths. Any information would be greatly appreciated.

Robert Daryl Conway
First Timer - St Marys, New South Wales, Australia
2004

It wasn't clear to me whether you need information on copper cyanide plating, Robert, or an introduction to electroplating in general. The distinction is important because 90 percent of your plating problems will arise from sources other than within the copper cyanide plating tank itself. The Canning Handbook [on eBay, Amazon, AbeBooks] is unbeatable.

"Trouble in Your Tank" by Larry Durney would be a good one too, but it's also currently out of print. Other than those, please see our list of "must have" books, and our page of selected titles from Amazon. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: