-- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

on this site
current topics
topic 2658

SPC Book for beginners


Hey ya'll,

I'm looking for a good book on Statistical Process Control, preferably one for beginners. Any ideas? Appreciate any help you might offer.


Kitt Daly
- Austin, Texas


When I was in the plating business back in the 80s, I used the series of 3 workbooks from Perry Johnson, Inc. (313) 356-4410, to teach SPC These workbooks are written in an easy to read style with self tests after every chapter. The examples sited are from manufacturing and the books are not heavy with complex math. If these books are still available I would recommend them.

Jovona McDowell


hello, I would like to ask for a syllabus for Basic SPC or something like SPC for Beginners...which topics to be discussed... thak you. Oscar

Oscar dela Cruz III
- Philippines

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Comment to THIS thread START a NEW threadView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018, Inc., Pine Beach, NJ   -   About   -  Privacy Policy
How Google uses data when you visit this site.