-- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

on this site
current topics
topic 2639

Electroless tin


I am interested in more details on electroless (immersion) tin. I read carefuly previous communications on the subject and actually tried the chemical formulation that was given (Letter #260). The results were impressive. However, can you point me on how to obtain a thicker tin plating? What is the influence of the temperature and the chemical reagents that are used? What is the influence of the solution pH?

Is there any possibilty to produce electroless tin coating that will last "forever"?

Thank you,


Yosi El-Eden

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Comment to THIS thread START a NEW threadView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018, Inc., Pine Beach, NJ   -   About   -  Privacy Policy
How Google uses data when you visit this site.