Curated with aloha by
Ted Mooney, P.E. RET
The authoritative public forum
for Metal Finishing 1989-2025
-----
Zinc and Copper needed
We are located close to Atlanta Georgia. We use several thousand tons of zinc and copper per year. We use carbonates, sulphates, oxides, etc. Please send all ideas to our e-mail. We will actively investigate all materials and respond to all inquiries.
Thank you,
- Conyers, Georgia, USA
2003
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
Ed. note: We have been assured by Mr. Munoz that if there were a transaction, his company would pay for the product 100% of the time (in other words, they are not a treatment facility that would ever charge for disposal).
Q. We produce around 15 tons annually of a filtercake that transports as residual waste and is about 4% zinc and would examine any opportunity to supply it for beneficial reuse.
James W- Mountain Top, Pennsylvania, USA
November 7, 2013
A. Hi James. It's fine to keep your eyes open to any such opportunity, but don't waste too much of your time on it. I've never heard of a single zinc plating shop which didn't have to pay for the disposal of their zinc waste.
Regards,
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
November 8, 2013
Q, A, or Comment on THIS thread -or- Start a NEW Thread