PEOPLE helping each other -- No AI, no cost, no reg'n, no damn popups
(As an Amazon Associate & eBay Partner we earn from qualifying purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Checking Methods

Method of checking Component cleaned by Acid Cleaning ... Method of Checking Components being Electropolished .... Method of Checking Components being treated with Alodine Clear Coating.

The Components being Electropolished are Stainless Steel. The Components being Electropolished are Copper Components. The Components being Alodine Clear Process are Aluminum Components. Please help us out in this issue.

Shreesha A P
- Bangalore, Karnataka, India
2003

2003

Hi Mr. Shreesha,

Flash-card quizzes like those sentence fragments very rarely garner any response at all. Can you please see www.finishing.com/letters/abstrac.shtml and try to flesh out your questions please? If a posting offers readers an opportunity to learn something from it, they'll almost surely help. Thanks!

Otherwise, we have tens of thousands of Q&A's here and an excellent search engine which will lead you to the answers to all of your questions. Good luck :-) Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

A. Ted was nice. You have asked for a library of information, not a simple question. Sounds like you need a consultant or 2 or 3 or 4 days.

James Watts
- Navarre, Florida
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: