Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

TT-P-1757 types





2003

Hello,

I'm trying to find TT-P-1757 [affil link or DLA] type 2 class C? Do you know what the difference is between Type 1 and Type 2 class C? So far all I can find is type 1 bulk or type 2 Spray but not with the class C.

Thank You,

Brian Mooney
precision machining - Canoga Park, California, USA



2003

Brian, have you gotten a copy of TT-P-1757 yet? It's at http://assist2.daps.dla.mil/quicksearch/, and fill in the "TT-P-1757" in the top box. You'll notice that it says Type I - Volatile content consists of non-photochemically reactive solvents Type II - Volatile organic compound (VOC) content less than or equal to 340 grams/liter (gm/l) (2.8 lb./gal) and that Class C refers to Chromate based corrosion-inhibitors. The Qualified Products List has long been cancelled, so you'll have to call around to find out who makes what. But at least having the spec may help. Good luck!

lee gearhart
Lee Gearhart
metallurgist - E. Aurora, New York


adv.: ResinTech banner



(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA