Mr. Rogers: "Look for the Helpers. You will always find people who are helping."
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

CHEMICALS, ELECTROPLATING, NaCN ETC

I WANT TO KNOW THE DETAIL PROCEDURE FOR ELECTROPLATING IN METAL PARTS SUCH AS, METAL PARTS OF AUTO MOBILE , BICYCLE PARTS BY PRODUCT SODIUM CYANIDE.

PLS HELP ME , please HELP ME WITH YOUR REPLY

WE ARE ALSO LOOKING SUPPLIERS / MANUFACTURERS please HELP ME IN FINDING SUPPLIER OR MANUFACTURERS FROM EUROPE ETC WHO CAN SUPPLY SODIUM CYANIDE BRIQUETTES 99% OR 98% MIN IN PACKING 50 OR 60 KG NEW STEEL DRUMS OR IRON DRUMS.

BEST REGARDS,

MUHD RIZWAN
- KARACHI, PAKISTAN
2003

Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: