No registration or passwords; no pop-up ads -- just aloha, fun, & answers.
(as an eBay Partner & Amazon Affiliate earns from qualifying purchases).
Home /
T.O.C.
Fun
FAQs
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Site 🔍
Search
pub  Where the
world gathers for metal finishing
Q&As since 1989



-----

Atomic Absorption Instrumentation - How to choose the best?




I am currently researching the purchase of an Atomic Absorption Spectrometer [on eBay or Amazon] for the laboratory in our shop. I would be interested to hear from anyone who has an instrument of this sort and why they like the brand of instrument they use.

Sincerely,

Dana Leaman
finishing shop - Capitol Heights, Maryland
1998


Dear Dana,

we have an atomic absorption spectrophotometer [on eBay or Amazon] purchased from Perkin Elmer; it works very well.

Franca

Francesca Assone
electroplating shop - Torino, Italy
1998



We also have a Perkin - Elmer AAS and are quite satisfied. But you have to take in consideration not only the instrument but the service as well. You can have a great instrument and not be able to operate it for a week because of a small detail that needs repair.

I think that service is the name of the game.

sara michaeli
sara michaeli signature
Sara Michaeli
Tel-Aviv-Yafo, Israel
1998


Do you have XRF? A number of people have XRF for thickness measurements and appear unaware that they can use it for metal analysis. Since XRF and AA machines cost about the same it makes sense to buy one XRF for both jobs. We threw our AA away about 2 years ago and never missed it. You MUST make your own standards (simple) and accept answers maybe as much as ± 10% of "true" - but in reality do you really care if, for example, your gold metal content analysis comes out as 5.5 gpl when it is really 5.0 gpl? Actually, we get very much better than that these days, simply because we have found out how to make standards. And we had to teach ourselves, advice from equipment suppliers was not much use.

And incidentally, from setting up the AA to getting a gold answer was about 20-30 minutes. With XRF it is about 3 minutes maximum. But our AA machine was a bit elderly.

Hope this helps. But it will not if you are looking for ppm of metals, XRF is not THAT accurate.

Peter Vivian
- Process Services Ltd - U.K.
1998


DEAR SIR, WE WOULD BE GRATEFUL IF YOUR COMPANY COULD ASSIST US OR RECOMMEND A COMPANY THAT CAN. WE ARE LOOKING FOR A LOW COST OR SECOND HAND "ATOMIC ABSORPTION SPECTROPHOTOMETER" THE UNIT IS TO BE USED ON GOLD AND TO ASCERTAIN WHAT OTHER MINERALS MIGHT BE PRESENT WITH THE GOLD E.G. COPPER,SLIVER ETC. EASE OF USE IS ALSO IMPORTANT. ANY ASSISTANCE YOU COULD GIVE WOULD BE GREATLY APPRECIATED. REGARDS GERRY MULHOLLAND MONITORING AND CONTROL SYSTEMS PO BOX 785182 SANDTON 2146 SOUTH AFRICA.

GERRY MULHOLLAND
- SOUTH AFRICA
1999



Hello

I need to know manufacturer of atomic absorption and quality of their products, any one how can help me, please. thanx a lot, awaiting your replies.

Ariamanesh
Iran
1999



I just purchased a used EEL Atomic Absorption Machine. It did not come with a manual. Can anyone tell me where to find a manual for this machine?

Thank you very much,

Rick Tucker
- Moberly, Missouri, USA
2000


Hi everyone,

Atomic Absorption Spectrometry for gold measurement in aqueous samples is an excellent technique. We have one Phoenix-986 AAS from Sedico Ltd. that has been working continuously for 2 years now and has provided full satisfaction.

Thanks and best regards,

Brian Thomas
- Cambridge, UK
2001




(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"