A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing.
on this site FORUM
Chrome plating over brass parts
We are looking for the best way of continuous removal of copper and zinc from a normal chrome plating bath. The copper and zinc impurities arise from areas where the work is partially masked off - otherwise of course the chrome plating would prevent any dissolution of the brass substrate into the bath.
Has anybody any experience with electrodialysis in this application or any alternative suggestions?
- Prague, Czech Republic
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.