finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
topic 1684

Brass Blackening Solution


(1998)

I need to find a recipe for a brass blackening solution.

What I've been trying so far is:

Copper Nitrate in dist water and equal quantity of ammonia + Sodium Carbonate to reduce the acidity.

This solution should take about 1 minute to produce rich "Gun-blue" black on brass, but it doesn't work properly. Thanks for your help.

Massimiliano C [last name deleted for privacy by Editor]
Australian National University, Canberra, ACT-AUSTRALIA


(1998)

There is a plating process which requires copper plating followed by blackening in a solution called Ebonal. I cannot remember the particular supplier. Good luck.

Jeff Mills
metal finishing shop - Gorham, Maine


(1998)

Have you tried Electroblack ?

It's available in Australia from Macdermid.

Mick Long
- Australia


Bob Brownell's Gunsmith -- Complete I, II, and III & IV

(1999)

I am looking for a recipe to put a black finish on mild steel.Can anybody help me. Kevin

kevin C [last name deleted for privacy by Editor]
sawell - South Africa


(1999)

Hi Kevin,

Blackening steel is a little bit different subject than blackening brass because we are speaking of reactions with the substrate metal, not a separate coating. We have an FAQ about black oxide and cold blackening. You can follow that up with more in-depth information in the Metal finishing Guidebook. After you have a general idea what technology you are interested in, please get back to us with your followup questions. Thanks.

Ted Mooney, finishing.com Teds signature
Ted Mooney, P.E. RET
finishing.com
Pine Beach, New Jersey


February 7, 2008

For blackening mild steel, and pretty much any ferrous (non-stainless) steel, try Brownell's Oxpho-Blue. Shy of sending parts out for hot blueing and specialty oxide blackening, this has been the easiest and most durable cold-blue solution I've ever used.

Mike Forti
- Franklin, Massachusetts



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.