Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site

Chime right in! (no registration req'd)

-----

"Stripping of hooks"



 

In the powder painting operation, the hooks or the jigs used for hanging the components, what is the best method for stripping the powder paint after 1-2 rounds in order to improve the conductivity.....?

Nanda V Srikakulam
Otis Elevator Co. Ltd., - Bangalore, India
^


 

Try wrapping the hooks with disposable aluminium foil before hanging the parts on. Alternatively, we use a blow torch and wet grit blasting

John Tuohy
- Ireland
^

none
finishing.com is made possible by ...
this text gets replaced with bannerText
spacer gets replaced with bannerImages

Q, A, or Comment on THIS thread SEARCH for Threads about ... My Topic Not Found: Start NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2021 finishing.com, Pine Beach, New Jersey, USA