23+ years of serious education, promoting Aloha,
& the most fun you can have in metal finishing
on this site FORUM
How can I strip a Co-Cr coating from an AISI 316 substrate?
"... just a little help from my friends!"
Does anybody know a chemical/electrochemical way (no mechanical operations are feasible) to strip a very thin Co-Cr alloy coating from a SS substrate (AISI 316 L)? Obviously without affecting/damaging the smooth surface of the substrate! The coating is a sort of Stellite (something like Stellite 25) and its thickness is less than 1 micron.
Thanks in advance,
- MazzË, Italy
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.