finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsSuggested
Books
Help
Wanteds
Advertise
on this site
FORUM
(current
topics)
topic 12309

Electroless nickel plating on how to improve the surface roughness


 

I am an undergraduate student. I am currently doing a project on development of electroless nickel coating on ceramics substrate. I have successfully plated the nickel coating using my own formulation of coating solution. The surface roughness of the nickel coating is about 0.2 miron meter measured by surface profiler. I would like to know is there any method to improve the surface roughness from micron meter to nanometer.

Ellen Chong
- Kuala Lumpur, Malaysia



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.