finishing.com -- The Home Page of the Finishing Industry
23+ years of serious education, promoting Aloha,
& the most fun you can have in metal finishing smiley
    no popups, no spam
HomeFAQsSuggested
Books
Help
Wanteds
Advertise
on this site
FORUM
current topics
topic 12229

Heat treatment in vacuum against corrosion


 

I would like to have some information on heat treatment in vacuum for stainless steel. I don't have a problem getting necessary hardness but I would like to improve surface quality. I need to know the connection between surface quality and the vacuum rate in the chamber.

With my best wishes,

Veli Can Yolseven
- Konya ,Turkey



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Comment to THIS thread START a NEW threadView CURRENT TOPICS



Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2018 finishing.com, Inc., Pine Beach, NJ   -   About finishing.com   -  Privacy Policy
How Google uses data when you visit this site.