finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsSuggested
Books
Help
Wanteds
Advertise
on this site
FORUM
current topics
topic 12009

PORES ON RIMS


 

HELLO FRIENDS,

I GOT A 17" CAST ALUMINIUM RIM FROM MY M/CYCLE, COVERED WITH FACTORY PAINT. AFTER SENDING IT TO BE POLISHED @ LATER ANODISED, I FOUND MANY DOTS OF HOLES GREATLY MAGNIFIED AFTER THE GOLD ANODISED. SO THE SHOP GOT TO REMOVE THE GOLD ANO. & REPOLISH IT AGAIN. IS THERE ANY WAYS/MEANS OF FILLING UP THE FEW HUNDREDS OF TINY HOLES? WILL PLATING WORK?

ELVIS GUO
- SINGAPORE



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2018 finishing.com, Inc., Pine Beach, NJ   -   About finishing.com   -  Privacy Policy
How Google uses data when you visit this site.