A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing
Please suggest to me a suitable process for etching on copper
0.3mm thickness (the etching should be all the way through, i.e., the etching depth is the same as the thickness). This process is supposed to produce a slot on round bowls/pots of 0.3mm thickness. Pot outside diameter is 33mm. Presently ferric chloride is used.
- Sahayog, Nagar, Pune
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.