Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

Protective Finish for PhBr Electrical Contacts



 

Need a finish to maintain brightness and conductivity on phoze Bronze electrical contact. Want the finished assembled contact blocks to have a bright attractive finish. Would prefer a finish that will protect brightness through handling for assembly.

Paul Edie
- NY



 

Lacquers and electrophretic coatings would make the contacts non-conductive, so it looks like you should be looking at chromates or benzotriazoles. But all non-precious metals tarnish, so the finish will have a limited lifetime.

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey


adv.:   
anoplex banner



(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA