-- The Home Page of the Finishing Industry
23+ years of serious education, promoting Aloha,
& the most fun you can have in metal finishing smiley
    no popups, no spam
on this site
current topics
topic 10581

Best brass polish we have found


We have lots of Brass and have tried the normal stuff without much luck. At a home show my wife bought a bottle of The Victorian House Brass-copper restorer P.O.Box 384 Skiatook, Oklahoma 74070. Looked for them on the net with no luck. It is expensive. It is so good that there must be a similar product available in stores. Anyone know of it and have any comments. Used it with #0000 0000 steel wool [linked by editor to product info at Rockler].

Steven Ogle
- Phoenix, Arizona

Ed. note: Website address is

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Comment to THIS thread START a NEW threadView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018, Inc., Pine Beach, NJ   -   About   -  Privacy Policy
How Google uses data when you visit this site.