finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
(current
topics)
topic 10425

Adhesion of Copper Acrylic based conductive coating on PC-ABS


 

Hello,

After performing adhesion test according to ASTM D3359 [link by ed. to spec at TechStreet] -method B,the tape was covered with paint. The plastic surface showed excellent adhesion. Please advise if this result is within UL specification and what could be the probable cause.

Thanks,

Ofer Rachman
satellite network - Tel-Aviv, Israel



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.