finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
(current
topics)
topic 1165

Aluminum Substrate Corrosion Problem


(1998)

We have a customer who has an aluminum substrate that is exposed to a 50% Trifloroacetel Acid and 50% Methanol Alcohol environment.

Anodizing was not a satisfactory finish for this environment. We would appreciate information for a finish that would be impervious to these chemicals.

The parts would be exposed to a splashing effect rather than an immersion effect.

Thanks for your help

Joe Hillock
anodizing shop - Philadelphia, Pennsylvania


(1997)

Two part polyesters work well for most acid environments. There are very probably a few powder coat formulations that would work well also.

James Watts
- Navarre, Florida



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.