No registration or passwords; no pop-up ads -- just aloha, fun, & answers.
(as an eBay Partner & Amazon Affiliate earns from qualifying purchases).
Home /
T.O.C.
Fun
FAQs
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Site 🔍
Search
pub  Where the
world gathers for metal finishing
Q&As since 1989



-----

Setting Up A Zinc Plating Plant



I am urgently looking for information/books/website/anything to setup a small passivated zinc plating plant.

We have no metal finishing of this type available in our island state and I have found it impossible to find out about setting up a small plant and equipment to do it.

We have small parts that would be well suited to barrel plating and also have other parts which would have to be hung and these are approx. 600 x 600 mm/2' x 2'.

Thanking you in anticipation.

David Allenberg
Australia
1998



Usually available on eBay; sometimes
on AbeBooks
or Amazon

(affil links) mfg_online
free pdf is currently available from academia.edu

Hi David. I'm afraid that something as involved as setting up a zinc plating and passivating line, requires knowledge that you're won't be able to acquire in the reasonable future, especially with no similar installations to see. You'll probably have to retain somebody who does know how to do it. Some such people are listed in the consultant's directory here.

But you can get a quick introduction to the topic in the Metal Finishing Guidebook.

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey



The Canning Handbook [on eBay, Amazon, AbeBooks] is a good supplement to take with the consultant's medicine.

Also see our reference book section.

tom & pooky   toms signature
Tom Pullizzi
Falls Township, Pennsylvania
1998


Dear Reader

I have the same need as Mr. David Allenberg, So can you tell if you solve your problem and from where you get the plant and the cost

Best Regards

samir al-alaiwat
hydraulic and technical center
1999



2000

I am urgently looking for information/books/website/anything to setup a electrodeposition copper- zinc- tin / free settling Sn-Cu.

Thank you very much for your understanding.

Yours sincerely,

dr. ing. Valentin RIZEA

Rizea Valentin
- Buzau,Romania


I don't know what you mean by "free settling". Do you mean "electroless" or auto-catalytic?

There are lists of good books here, specialized technical journals for this industry, associations and trade groups serving the industry, and some on-line articles on the subject.

You are already at the best website in the world for this purpose, so to look elsewhere would be to squander your time smiley face.

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2000




(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"