No registration or passwords; no pop-up ads -- just aloha, fun, & answers.
(as an eBay Partner & Amazon Affiliate earns from qualifying purchases).
Home /
T.O.C.
Fun
FAQs
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Site 🔍
Search
pub  Where the
world gathers for metal finishing
Q&As since 1989



-----

Looking for information on anodizing




1998

Q. I'm looking for information on anodizing. I've heard of processes that involve voltage controlled growth of an oxide (more voltage, more oxide, different color) any one know what I'm talking about?

The process involves using 10% trisodium phosphate [on eBay or Amazon] to 90% water solution and a variable DC power supply(0-150 volts)

So far my experimentation has led to a neat way to put pinholes in aluminum foil!

HELP!

Peter Geraci


A. Peter:

It sounds like you are describing two-step anodizing. The first step is a conventional sulfuric anodize, and the second is an anodize bath containing a lithium salt. The lithium deposits into the pores of the coating. the longer you anodize in the second bath, the deeper the color becomes. Unfortunately, all my reference books are at work...

Gerald Janssen
- coil anodizing
1998


A. Peter,

The process you described sounds like titanium anodizing. It is true that the color is controlled by changing voltage for anodizing Ti in phosphate solution.

If you want to anodize aluminum alloys with different colors, however, it is a different story. In this case, you may refer to the information in Gerald's email.

Ling

Ling Hao
- Grand Rapids, Michigan
1998


A. Hi Peter. Please search our site for "color anodizing of aluminum". As Ling says, the colors of aluminum anodizing are from dyes absorbed into the pore structure, not from thin diffraction films as in titanium anodizing. The usual process solution is 10-12% sulfuric acid by volume, and the usual voltage is about 12 volts, with a current density of perhaps 12 ASF. After anodizing to a thickness of .0002" to about .0008", depending on how dark and saturated the color must be, you dip it in dye, then close off the pores by swelling the aluminum oxide in steam, hot water, or other sealants.

Best of luck.

Regards,

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
December 6, 2012




(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"