No registration or passwords; no pop-up ads -- just aloha, fun, & answers.
(as an eBay Partner & Amazon Affiliate earns from qualifying purchases).
Home /
T.O.C.
Fun
FAQs
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Site 🔍
Search
pub  Where the
world gathers for metal finishing
Q&As since 1989



-----

Electrolytic Polishing Bath Additives




1998

Q. Are there additives for acid baths used in electropolishing stainless steel that serve to minimize the formation of sludge?

Have metal chelating agents been used for this purpose before?

Thanks for your help.

Claude [last name deleted for privacy by Editor]


A. Claude:

Yes there are proprietary electropolishing solutions offered by such firms as Electro Polish Systems, Menomenee Falls, WI; Molectrics, Cleveland, OH. You will also find some immediate information on this issue from Metal Coating Process Corporation Good luck.

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
1997



1998

RFQ: I would be obliged if someone could furnish me with a list of companies who make commercial electropolishing units for laboratory research purposes (as much detail about the companies as possible please -- e.g., location fax no. tel. no., etc.)

Mary O [last name deleted for privacy by Editor]

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)



A. Mary:

Metal Coating Process Corp. offers small EP units for R&D, pilot plant, and limited production operations. You will find us listed in the Suppliers Directory on this web site, or click on through and you can contact us through our own web site.

Please furnish a complete address with telephone and fax numbers so we can furnish you with printed literature.

Ed Bayha
Metal Coating Process Corporation - Charlotte, North Carolina
1998




(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"