A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing
on this site FORUM
Need better adhesion of Rilsan onto stainless steel
I would like an advise on how to improve the adhesion of electrostatically applied Rilsan coating over stainless steel (300 series). The results with costom alkaline cleaning and acid pickling are not good enough.
Thank you in advance
Noa, Can you lightly grit blast it with 320 grit?
- Navarre, Florida
What are you using for a pickle?
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.