Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Need electroformed copies of Fresnel lens

1996

RFQ: I am looking for a shop that can produce electroformed copies of a fresnel lens. The lenses have a 25 mm radius and the grooves are 0.2 mm deep.

Fernando E [last name deleted for privacy by Editor]

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)

Q. Fresnel Lens is a new subject to me. I also need some help on this topic.

GUOLIN P [last name deleted for privacy by Editor]
UAH - Huntsville, Alabama
1997

A. Hi Guolin. Berl Stein is the guy I'd contact if I were you. He was ~~recently~~ employed by Fresnel Optics / Reflexite Technology, and is now president of NiCoForm [a finishing.com supporting advertiser].

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
(This entry re-checked and still valid, November 2012)

A. Fernando, Goulin and anyone else needing a quote on a Fresnel lens. Call Donna at Fresnel Optics [Rochester, NY] to get a quote.

Cheers from PlaterB

"PlaterB" Berl Stein
NiCoForm, Inc.

Rochester, New York

1997

"Solar Energy projects for the Evil Genius"

on AbeBooks

or Amazon

(affil links)

RFQ: Dear Sirs,

For a job we are going to produce, we need 1000 fresnel lens 25.5 x 18 cm.(about).

We do not need particular enlargement.

If someone could help me giving directions, thank you in advance,

Luca B [last name deleted for privacy by Editor]
- Fusina, Italy
1997

A. I run an electroforming facility which can create the electroforms for the fresnel optics. We duplicate very precise holographic microstructures with nickel process. These can be either hard or soft and thickness tolerances are within microns.

Tim Dolan
Bridgeport, Connecticut
1997

finishing.com is made possible by ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: