PRACTICAL
FEATURES MEAN OPTIMUM PERFORMANCE
Control Packages
A basic or premium control package is available. Standard
industry test specifications are built-in and pre-programmed so you
can begin testing immediately. The number of programs and steps that
the chamber can store varies with standard and premium controls. Both
control systems can be easily updated for future testing needs of
customized for special applications.
Standard Controls
- Programmable Logic Controller (PLC)
- Easy-to-use operator interface screen
- RS232 Port for computer interfacing
- Two-or four-line, 20-character text display makes chamber
controlling easy to learn and master
Standard Controls shown on left, Premium Controls (Recorder shown
is optional) shown on right
Premium Controls
- Controllable humidity from 30-95% +/- 5% (as limited by a 22C
dew point)
- Air-actuated pneumatic cover lifters
- 60-gallon mixing tank with automated agitation system
- Advanced, rack-style programmable logic controller (PLC)
- 256 gray scales of full color, touch control videoscreen
provides for more sophisticated chamber control and data
manipulation
- Easy-to-use operator interface screen, with Realtime,
Multi-Pen Line Trending
- Memory is greatly increased to allow for increased program and
data set storage
- Self-contained equipment diagnostics simplifies repairs and
troubleshooting with graphics
- Nested looping capability promotes creativity in advanced
cyclic testing
- "Auto-Pilot" operation simplifies use
- RS232 Port for computer interfacing
Customize or Upgrade
In addition to the three standard CCT models available,
Auto Technology has the ability to customize and upgrade chambers -
either at the time of purchase or in the future.
Protected Heating Unit
Auto Technology heater strips are mounted in a vertical
position under a diffuser plate to protect the heaters from any salt
or solution build-up that might cause it to fail prematurely.
A grounding grid, sandwiched between the electric heater and
surrounding rubber housing, is specially designed to protect the unit
from stray voltage. In the rare event of a heater failure, the grid
would ground the voltage and cut power to the heater, protecting both
the chamber and the operator.
Bubble Tower
The bubble tower features Auto Technology's unique ATO-Fill Automatic
Water Fill System, which provides longer unattended testing. The low
water/high temperature sensor and pressure-relief valve are added
safety features. The bubble tower can be easily serviced without
disassembling the unit.
Bubble Tower shown at left, Unifog Dispersion Tower with
Adjustable Cone shown at right.
Unifog®
Dispersion Tower
Auto Technology's Unifog Dispersion Tower has an inverted cone design
to provide uniform mist throughout the chamber. The adjustable cone
located at the top not only baffles the fog evenly throughout the
chamber, but can be manually raised or lowered to direct the fog to
meed your testing requirements. Large droplets are deflected off the
cone back into the reservoir (not onto the test specimens), according
to ASTM specifications.
MORE STANDARD FEATURES
- Swivel Casters for Easy Movement
- Leveling Bolts
- Low-Water Cut-Off Protection on Bubble
Tower
- Front Access to Components for Easy
Maintenance
- Certified Air PressureGauge with +/- 1%
Accuracy
- In-Line Filter System for Salt and D.I.
Water
- Built-In 60-Gallon Salt Solution
Reservoir
MORE OPTIONS
- Solution Spray, Immersion and Controlled
Humidity Options
- Automated Agitation/Mixing System for Solution
Tank
- External Condensate Collection Package
- Air-Actuated Cover Lifters
- Operator Interface/Datalogging Software
- Recorders (Strip and Circular)
- Sample Holding Devices
- Installation Kit
- pH Meter
- Water Deionizer Package
- Start-Up Kit
- Spare Parts Maintenance Kit
- 60-Gallon Mixing Tank on Stand
- Training Class on CCT Operations
- Modular Design
Auto Technology Cyclic Corrosion Test
Chamber:
How it
works:
Standard and Optional Cycles
Cyclic
Corrosion Test Chamber - Back to
Auto Technology
Site design & maintenance by finishing.com,
inc.