|
ANODIZING SERVICES
Val-Kro, Inc. offers state-of-the-art anodizing and chem
film / chromate conversion services. We have the
ability to accommodate parts from the smallest up to 6.5 ft.
in length by 3.5 ft. wide. Val-Kro is capable of the
following specifications:
- MIL-A-8625F - Type II - Classes I and II
- MIL-A-8625F - Type III - Classes I and II
(Hardcoat)
Hardcoat Aluminum Anodizing
We utilize a true hardcoat chilling system. This
means we do not use additives to reduce the temperature of
the anodizing cell to the required 33 degrees
F. This results in a more consistent coating in terms
of finish, thickness, and hardness both part to part and lot
to lot. Many of our customers have expressed
that our hardcoat finish is far superior when
compared to the coating provided by other
suppliers. This is because we properly chill our
bath. Don't accept sub par hardcoat. We will
provide samples free of charge so you can judge for
yourself.
CHEM FILM (CHROMATE CONVERSION) COATINGS
- MIL-DTL-5541F - Type I and II
chem film / chromate conversion (hexavalent chrome free)
- MIL-C-5541E
chem film / chromate conversion
ELECTROLESS NICKEL COATINGS
Val-Kro has been offering electroless nickel plating for
30 yrs. Our family of electroless nickel coatings is diverse
and appropriate for a large number of applications.
- Low phosphorous electroless nickel
- Mid phosphorous electroless nickel
- High phosphorous electroless nickel
- Co-deposit of electroless nickel and Teflon
Trust Val-Kro, Inc., an ISO 9001:2000 certified
operation, with your electroless nickel, anodizing and
chromate conversion requirements. We have been
providing metal finishing services to industry since 1960
and understand the importance of turn-around and getting it
right the first time. CALL TODAY :
716-694-5001
www.VALKRO.com
For information on Val-Kro's subsidiary, Pellets, LLC,
please visit their
Worldlink Listing in
the Chemicals Directory.
|