No passwords, no registration, no paywalls, no popups

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Process to put copper bottoms on stainless steel utensils

I am looking for process to put copper bottom on stainless steel utensils. I am looking for simple process. Any help will be appreciated

Kishor Valia
K. Valia & Coy. - Mumbai, India
2000

I know this can and has been done by copper electroplating to controlled depth. I don't know if there is any other available process such as laminating.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Need quick confidential answers? $25
Need project assistance? $100/hr.
2000

It maybe possible to weld the copper on during production. If the utensils (pots?) are drawn out from a stainless steel stamps then if a smaller copper stamp were aligned below the steel one it could bond to the steel during drawing. I'm no expert on this, but this could be an avenue worth looking into.

Ian

Ian Brooke
university - Glasgow, Scotland
2001

Sorry! Finishing.com is temporarily Read-Only.
Please maintain your bookmarks! Although Ted Mooney is retiring, finishing.com is not!
It will have a new owner/curator very shortly!

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: