HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 53122

Need wear and corossion resistant gold/yellow colored finish

September 21, 2009

I have some hardened steel rails that are about 74" x 0.2" x 0.6" that need that will be used in an icy environment. TiN & ZrN is out because the parts are too large and Nedox CR+ has too high of a baking temperature for the parts and will distort them. I'm looking for the gold/yellow type color just for aesthetics to match the rest of the part. If there is nothing out there I will just have them EN or hard chrome plated.

Thank you,

Elijah Pembrook
- Glendale, CA USA
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: