HOME
FAQs
BOOKS
JOBS: Help Wanted
Suggestions
you are here: Hotline/Forum =>
Letter 44073
Liver of Sulphur disposal
+++++++
I am a jewelry hobbyist and am just getting back into working with silversmithing, and so forth. I recently started working with PMC and Liver of Sulphur [Adv:
Liver of Sulphur
[linked by editor to product info at Dick Blick]] patina pieces. I made a very small (pint) of mixture to work with several pieces. The mixture is not grey with flakes on the bottom. How do I discard this mixture? There is nothing on the can that says how to properly discard it.
Mary Lou Froese
hobbyist - South San Francisco, California, USA
+++++++
An MSDS sheet must be available from the manufacturer, Mary.
|
Ted Mooney, P.E.
finishing.com
Brick, New Jersey
|
Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: