No passwords, no registration, no paywalls, no popups, no AI

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Need MIL-C-83286 Painting service

We have a need for priming and painting about 30 parts (5 different parts), fairly small (sizes from 16" x 10 x .5" plates to 3" x 3" x 1" flanges). The specification is for priming with MIL-PRF-23377 [⇦ this spec on DLA] and painting with MIL-C-83286 gloss paint per FED-STD-595 Color 13538 (Yellow). Can someone quote this requirement for us?

Andy Corbin
Electronics Manufacturing - Fort Walton Beach, Florida, USA
2007

Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).

Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: