HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 42003

Powder plastification - Orange peel effect on surface

++++++

Hi,

I'm working on a project that tries to decrease the tnickness of PVC plastificated meshes from galvanized wires (diameter 1,5 - 5 mm). For plastification we use the fluid bed.

I would like to know what realy are crutial parametres that influence the thickness of the plastification layer? (I think it could be constant temperature of preheating and cooling of PVC powder at 30°C or less)

Thank you very much,

Martin Krivan
perimeter determination - Congrier, France

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: