No passwords, no registration, no paywalls, no popups, no AI

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Need Anodized Aluminum Nuts and Bolts

2006

Hello,

I am looking for a US supplier for Bolts, Dome Head Allen Key, Allen Key Socket Cap, Nyloc Nuts, Standard Hexagonal, and flat washers. Specifically, anodized (see attach.).

MATERIAL SPECIFICATIONS: 7075T73 high tensile aluminium.
MANUFACTURING PROCESS: Head - cold formed: shank - thread rolling.
ULTIMATE STRENGTH (PSI): Chemically brightened and colour anodised to between 8 and 12 microns thick. Multiple colors: Red, Blue, Gold (yellow), Green, and Black
YIELD STRENGTH (PSI): 490-560Mpa

Any information or suggestions you can provide would be greatly appreciated.

Jess Haynie
Distributor - Santa Barbara, California, USA

Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).

Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: