| Search our quarter-million Q&As |
Home of the finishing HOTLINE since 1989
-----Need Nedox Coating or Substitute
2000
I need to know something about a treatment named NEDOX CR+
It should work on Titanium plates (3.7165.1)
Thickness shall reach 15 - 25 microns
Does anyone know this treatment or a company that deals with it? preferably in Europe.
Thanks
Arnold
- Nonnweiler, Germany
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
I am seeking an alternate product for General Magnaplate Nedox HTR. I am providing release for molten Polypropylene from steel processing tools. I am looking for a low surface energy, not low friction and must be able to run at about 750 degrees F.
Thomas H [surname deleted for privacy by Editor]process engineer - Holland, Michigan, USA
2003
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
Seeking nedox platers in southern california to plate two rolls size: 23.625"OD x 66" long.
Alvaro C [surname deleted for privacy by Editor]Industrial roller manufacturer - Montebello , California, U.S.A
2004
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
Seeking Nedox type coating vendors for Stainless Steel. I am seeking to find a company that is capable of doing "Nedox Coating" on Stainless Steel to be used in Clean Room High Vacuum Atmosphere.
Paul M [surname deleted for privacy by Editor]- Denton, Texas
2004
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
Need Nedox Cr+ treatment for titanium. Does anyone know this treatment or a company that deals with it? preferably in China.
Zlwei [surname deleted for privacy by Editor]- Shanghai, China
2005
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
I am an engineer in food products, located in Sharkia, Egypt and we need to coat tins made of steel sheets (dim 185 x 85 x 80) with Nedox. If you know suppliers who can help us in that, please contact me.
Omneya S [surname deleted for privacy by Editor]food products - Sharkia, Egypt
2006
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.