HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 38091

Need Nickel and Hard Chrome Plating on Long cylindrical Parts

+++++

I am searching for a vendor who has the capacity to plate both nickel and hard chrome on a fairly long component. Specifically we have a part that is approximately 26 feet in length with an OD of 19" in diameter. The part is approximately 5500 lbs.

Fife Ellis
Oil Field Manufacturer - Houston, Texas

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: