finishing.com logo
  HOMEFAQsBOOKSHelpWantedAdvertiseContactFORUM Letter 37691

The finishing.com Hotline -- Serious Education ... plus the most fun you can have in metal finishing

Saltwater heatsink

+++++

Good day all,

I am developing a HS for electronics fully submerged in slow running saltwater.
the questions of corrosion resistance and thermal conductivity comes into play.

Some of the options available are:
salt resist / thermal conduction
monel/Inconel - good/poor
Titanium - good/poor

I am now looking at
1) Aluminium with electroless Ni-plating
2) Copper with electroless Ni-plating

No leaching allowed into the saltwater.
Appreciate all your insights and thoughts.
advance thanks.

Pang Cheng Lip
Designer - Singapore

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & DevicesUsed & Surplus


©1995-2015 finishing.com     -    Privacy    -    Search