No passwords, no registration, no paywalls, no popups, no AI

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Seeking PS-Plating, PS-1207 Black Trivalent, must be QS/ISO approved

Seeking plating source to apply PS-Plating, Ps-1207 Black Trivent to existing product we manufacture. Customer request change in plating 2 parts as of now. One part qsuare head shank 6.0mm across flats x 9.0mm length. Second part 4 diameter rivet largest diameter is 15.0mm smallest diameter 6.0mm x 24.9mm overall length. Total combined EAU of both parts is 560,000.

Ernesto J. Ramos
Special Fasteners - Rockford, Illinois, USA
2005

Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: