HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 37075

Need to black oxide large hot rolled steel

+++++

I have ten large ornamental wall sculptures that range in sizes:
approx. 3'5" x 4'5" and 4'5"x6'
made with 1/4"x1/2" flat bar
hot rolled steel

Six of the large ornamental wall sculptures can be viewed on the internet at
www.goodhuevos.com/newsite
Click on Gallery, then Iron Doodles to see them.

I live in Northern California and have not been successful in finding a shop who has big enough tanks to handle my pieces.

Isis Rodriguez
Professional Artist - San Francisco, California, USA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: