HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 37028

Need to dry aluminum (6061 and 6063) fines/grindings

+++++

We are looking for a company near Fullerton, CA who has the capability to remove/dry moisture from approx. 80,000 pounds of aluminum "fines/grindings." Max. 9% moisture content. We will require this service about every 6-10 weeks (depending on business)

The "fines/grindings" are created from a high speed polishing operation that polishes aluminum pipe 6061 & 6063. A water soluble oil is used when polishing this material.

Material is packed in gaylord boxes on two trailers. After "fines/grindings" are dry the material will need to be placed back in the gaylord boxes.

We will pay for the shipping.

Jim Davis
scrap metal trading - Fullerton, California, USA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: