HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 37025

Need decorative plating of cast zinc cabinet knobs

+++++

We are a hardware supply company and we need to plate different finishes on our approximately 30,000 Zinc die Cast cabinet knobs. As, we have not yet started production for the knobs, I'll very apprecaite if anyone can tell me which is the best Zinc Alloy (Zamac # 3 or Zamac # 5 or any other ) that produces the best finish.

We'll need to plate following finishes -

Polished Brass
Polished Chrome
Black Nickel
Polished Nickel
Satin Nickel
Satin Chrome
Oil Rubbed Bronze.

In addition, if there is also any commercial organization to do the job, I'll be very happy to speak with them.

Thank you,

Mohammad Kamaal
hardware supply - Moradabad, UP, India

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: